DYNAMIC ROUTING

AIM : To make Dynamic Routing between Routers and Computers in the network.

PROCEDURE

1)    Create a topology using 3 Routers and 3 Computers

2)    Configure IP address to routers go to global configuration mode in Ro, R1 and R2 configure connected interfaces

3)    Assign IP address for both Pc's with appropriate IP and subnet mask and default gateway

4)    Configure Routers with Dynamic Routing

5)    Double click PC move to desktop then command prompt give the command ping

DYNAMIC ROUTING – TOPOLOGY CONFIGURATION

PC0

IP Address : 50.0.0.2

Subnet Mask : 255.0.0.0

Default Gateway : 50.0.0.1

PC1

IP Address : 10.0.0.2

Subnet Mask : 255.0.0.0

Default Gateway : 10.0.0.1

PC2

IP Address : 30.0.0.2

Subnet Mask : 255.0.0.0

Default Gateway : 30.0.0.1

ROUTER 0

Router> enable

Router# configure terminal

Router(config)# interface fastethernet 0/0

Router(config-if)# ip address 10.0.0.1 255.0.0.0

Router(config-if)# no shutdown

Router(config-if)# exit

Router(config)# interface serial 0/1/0

Router(config-if)# ip address 60.0.0.2 255.0.0.0

Router(config-if)# no shutdown

Router(config)# interface serial 0/1/1

Router(config-if)# ip address 20.0.0.1 255.0.0.0

Router(config-if)# no shutdown

ROUTER 1

Router> enable

Router# configure terminal

Router(config)# interface fastethernet 0/0

Router(config-if)# ip address 50.0.0.1 255.0.0.0

Router(config-if)# no shutdown

Router(config-if)# exit

Router(config)# interface serial 0/1/0

Router(config-if)# ip address 60.0.0.1 255.0.0.0

Router(config-if)# no shutdown

Router(config)# interface serial 0/0/0

Router(config-if)# ip address 40.0.0.2 255.0.0.0

Router(config-if)# no shutdown

ROUTER 2

Router> enable

Router# configure terminal

Router(config)# interface fastethernet 0/0

Router(config-if)# ip address 30.0.0.1 255.0.0.0

Router(config-if)# no shutdown

Router(config-if)# exit

Router(config)# interface serial 0/0/0

Router(config-if)# ip address 40.0.0.1 255.0.0.0

Router(config-if)# no shutdown

Router(config)# interface serial 0/1/0

Router(config-if)# ip address 20.0.0.2 255.0.0.0

Router(config-if)# no shutdown

Dynamic routing in Router 0

Router> enable

Router# configure terminal

Router(config)# router eigrp 100

Router(config-router)# network 10.0.0.0

Router(config-router)# network 20.0.0.0

Router(config-router)# network 60.0.0.0

Router(config-router)# exit

Router(config)# exit

Dynamic Routing in ROUTER 1

Router> enable

Router# configure terminal

Router(config)# router eigrp 100

Router(config-router)# network 40.0.0.0

Router(config-router)# network 50.0.0.0

Router(config-router)# network 60.0.0.0

Router(config-router)# exit

Router(config)# exit

Router#

Router>

Dynamic Routing in ROUTER 2

Router# enable

Router# configure terminal

Router(config)# router eigrp 100

Router(config-router)# network 20.0.0.0

Router(config-router)# network 30.0.0.0

Router(config-router)# network 40.0.0.0

Router(config-router)# exit

Router(config)# exit

Router#

To Change Metric (in Router 0, Router 1 and Router 2)

Router# enable

Router# configure terminal

Router(config)# router eigrp 100

Router(config-router)# metric weights 0 0 0 1 0 0

ROUTER 0

Router# enable

Router# configure terminal

Router(config)# interface serial 0/1/0

Router(config-if)# delay 5

Router(config-if)# exit

Router(config)# interface serial 0/1/1

Router(config-if)# delay 10

Router(config-if)# exit

Router(config)# exit

Router#

ROUTER 1

Router> enable

Router# configure terminal

Router(config)# interface serial 0/1/0

Router(config-if)# delay 5

Router(config-if)# exit

Router(config)# interface serial 0/0/0

Router(config-if)# delay 4

Router(config-if)# exit

Router(config)# exit

ROUTER 2

Router> enable

Router# configure terminal

Router(config)# interface serial 0/1/0

Router(config-if)# delay 10

Router(config-if)# exit

Router(config)# interface serial 0/0/0

Router(config-if)# delay 3

Router(config)# exit

Options in All Routers

Router> enable

Router# show ip eigrp topology

Router# show ip eigrp neighbor

Router#